Teledyne Semi. obsolete IC info needed
Teledyne Semi. obsolete IC info needed
(OP)
I am looking for the data sheets and/or description of the pinouts for the following Teledyne Semiconductor digital devices (late 60's to early 70's vintage):
312CJ
321CJ
342CJ
312CJ
321CJ
342CJ





RE: Teledyne Semi. obsolete IC info needed
http://www.teledynewireless.com/products/amps.asp
http://www.galco.com/default.htm?/kwpages/IC-TSC-2.htm
etc.
RE: Teledyne Semi. obsolete IC info needed
If someone out there has an old IC Master set of catalogs about 1970 vintage maybe the information on these devices is included in there.
RE: Teledyne Semi. obsolete IC info needed
1. Contact the GALCO over:
"QUESTIONS REGARDING ORDERING ON-LINE
Email us with any questions regarding your on-line order at websales@galco.com
Email us if you have a technical question regarding our control product offering at salestech@galco.com
If you'd like to speak with someone regarding your on-line order, contact our Internet Sales Support line: (800) 575-5562
OTHER INQUIRIES
To inquire or order electronic repair, field service, or engineering services, contact our Sales Department at sales@galco.com or call (800) 521-1615
Reach our administrative staff at (800) 521-1615
Address mail to Galco Industrial Electronics, 26010 Pinehurst, Madison Heights, Michigan 48071
FAX Your Product Needs to Our Sales Dept. at: (248) 542-8031" since your product appears on their website.
2. Visit
http://www.xs4all.nl/~ganswijk/chipdir/c/t.htm#teledyne
where Teledyne is called TelCom
RE: Teledyne Semi. obsolete IC info needed
I have often found hard to find data sheets there.
Steve Smith
Product Engineer
Staco Energy Products Co.
www.stacoenergy.com
RE: Teledyne Semi. obsolete IC info needed
YES, Freetradezone was the first site that I tried, but no data sheets for these devices existed. I have searched many websites for this information. I need someone to point me to a website that definitely has this information, and has previously checked it out for the availability of these data sheets.
Otherwise, the pinout info from an old copy of the IC MASTER would be helpful.
Can someone out there help?