SW2003 ProE Decrypter Help
SW2003 ProE Decrypter Help
(OP)
I'm new to SW, can anyone give me so input of decrypting Pro-E files. I can find the decrypter on their support site as I was instructed....is this a lost cause for now?
Thanks for any help
Thanks for any help






RE: SW2003 ProE Decrypter Help
http://www.delcam.com
Otherwise, install Pro/Desktop Express. This will allow you to read Pro/E files and export them to IGES.
RE: SW2003 ProE Decrypter Help
Regards,
Scott Baugh, CSWP

3DVision Technologies
http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
When in doubt, always check the help
RE: SW2003 ProE Decrypter Help
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
RE: SW2003 ProE Decrypter Help
You can forget the Pro-E converter - it had to be pulled last minute.
However, I think SW might do a better job of highlighting that fact by now.
3/4 of all the Spam produced goes to Hawaii - shame that's not true of SPAM also.......
RE: SW2003 ProE Decrypter Help
FYI: My company (SW users) sometimes contracts work out to a Pro/E shop. We're going to have to stop doing that because we can't read their files anymore. I hope this gets back to PTC central. Bunch of wanks.
RE: SW2003 ProE Decrypter Help
RE: SW2003 ProE Decrypter Help
MadMango
"There is no reason anyone would want a computer in their home."
Ken Olson, president, chairman and founder of Digital Equipment Corp., 1977
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
RE: SW2003 ProE Decrypter Help
RE: SW2003 ProE Decrypter Help
Regards,
Scott Baugh, CSWP

3DVision Technologies
http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
When in doubt, always check th