SW2004 BOM Table
SW2004 BOM Table
(OP)
Has anyone successfully modified the column headings in the SW2004 BOM?
I have been able to change the heading of the ITEM column and it retains what I type, but when I try to modify the quantity cloumn heading it reverts back to its original text prior to printing. I would like to force it to display QTY.
Louis
I have been able to change the heading of the ITEM column and it retains what I type, but when I try to modify the quantity cloumn heading it reverts back to its original text prior to printing. I would like to force it to display QTY.
Louis






RE: SW2004 BOM Table
Click on the column heading
Click column properties in the feature manager
Adjust the title box to change the displayed name.
Thanks,
Daniel
RE: SW2004 BOM Table
Louis
RE: SW2004 BOM Table
Louis
RE: SW2004 BOM Table
RE: SW2004 BOM Table
I tried save it like that, but once inserted back into another drawing it comes back but this time at the end of the BOM.
Regards,
Scott Baugh, CSWP

3DVision Technologies
http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
When in doubt, always check the help
RE: SW2004 BOM Table