Alternate Design of Slender Walls (ACI 318-02 14.8)
Alternate Design of Slender Walls (ACI 318-02 14.8)
(OP)
If you use ACI 318-02 14.8 to design the reinforcing for a wall, do the maximum spacing restrictions sited in 14.3.5 apply?
I just hang here (occasionally)





RE: Alternate Design of Slender Walls (ACI 318-02 14.8)
14.8 is an alternative to 10.10 (column design) and does not exclude 14.3 directly.