Need Material Source
Need Material Source
(OP)
I need a source for some high temperature alloy bar stock.
The size is 2" diameter by 18" long bar stock.
I only need 2 pcs however.
The materials would be Udimet 700 or 713C.
Does anyone know of a supplier who would carry this material but also deals in these small quantities?
Thanks
The size is 2" diameter by 18" long bar stock.
I only need 2 pcs however.
The materials would be Udimet 700 or 713C.
Does anyone know of a supplier who would carry this material but also deals in these small quantities?
Thanks





RE: Need Material Source
http://www.principalmetals.com/contact.asp
Also, you can get small quantities from Special Metals. Use the following link:
http://www.specialmetals.com/tpc/index.html
RE: Need Material Source
http://www.hpalloy.com
ask for Scott 800 472 5569
Nice folks
good products
tom