Who among you can comment on the am
Who among you can comment on the am
(OP)
Who among you can comment on the amount of weld shrinkage to be encountered in welding large diameter segmented T316L SE pressure vessel heads? The heads are 38'Ø with a minimum thicknes of 1.125" and are fabricated from 13 segments. Do you know of any articles or studies addressing this issue? Please feel free to pass my request along to others if you wish.
Thanks for your help, Kent.





RE: Who among you can comment on the am
These websites may (or may not) be of benefit to you:
They contain information on segmented, large diameter tank & vessel heads.
www.chemicals-technology.com/contractors/pressure_vacuum/antonius_vesselheads/
www.enerfab.com/heads/TANK%20HEADS.htm
www.tankworld.com/
www.conrexsteel.com/
www.rkfab.com/
Good luck............
Please let us know what you discover.........
MJC
RE: Who among you can comment on the am