Hydrate forming regime.
Hydrate forming regime.
(OP)
Friends,
I work in a natural gas processing plant. We have a problem of fouling in our gas gas exchhanger which is a multi pass plate and frame Aluminium brazed exchanger.One stream gets cooled and 3 other streams are warmed up.I would like to know how to determine whether the fouling or increase in pressure drop is due to hydrate formation apart from scale and debris.I am willing to share the temperatuure and pressure of all streams alongwith gas composition if anybody could help out on this.
thanks in advance
I work in a natural gas processing plant. We have a problem of fouling in our gas gas exchhanger which is a multi pass plate and frame Aluminium brazed exchanger.One stream gets cooled and 3 other streams are warmed up.I would like to know how to determine whether the fouling or increase in pressure drop is due to hydrate formation apart from scale and debris.I am willing to share the temperatuure and pressure of all streams alongwith gas composition if anybody could help out on this.
thanks in advance





RE: Hydrate forming regime.
Best regards
Morten
RE: Hydrate forming regime.
There are 2 sides of a coin
One is to give, one is to take
Give until it hurts with a smile
RE: Hydrate forming regime.
Cheers,
Joerd
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.