Large diameter reducers
Large diameter reducers
(OP)
How would I go about building a CII-model of a cone/reducer that on one side is 28" and on the other 16"? WT = 6 mm.
Perpendicular to the centerline of this reducer is a nozzle of 28" diam.
Is modelling a pipe of average diameter (22") with a rigid element (represented by RRR)between centerline and the intersection of cone and the 28" nozzle a correct approach?
28"
! !
! !
! !
\! !
\ !
R\ !
R \
___ . R__ . ___
28" 16"
/
/
/
/
Thanks in advance.
Perpendicular to the centerline of this reducer is a nozzle of 28" diam.
Is modelling a pipe of average diameter (22") with a rigid element (represented by RRR)between centerline and the intersection of cone and the 28" nozzle a correct approach?
28"
! !
! !
! !
\! !
\ !
R\ !
R \
___ . R__ . ___
28" 16"
/
/
/
/
Thanks in advance.





RE: Large diameter reducers
Re-post on COADE FORUMS www.coade.com
Leonard@thill.biz
www.thill.biz