Making rope!!
Making rope!!
(OP)
Two things.
Any ideas how I can take a sweep that looks like Rope and make “Flatten” it somewhat. By flatten I mean make it appear as rope that has been driven over
by a truck. (The sweep path that I am using is a helix.)
Next, how about making the same rope shape appear bent. I have been trying to use guide curves with no success.
I'm open to any thoughts.
Thanks
Boosie
Any ideas how I can take a sweep that looks like Rope and make “Flatten” it somewhat. By flatten I mean make it appear as rope that has been driven over
by a truck. (The sweep path that I am using is a helix.)
Next, how about making the same rope shape appear bent. I have been trying to use guide curves with no success.
I'm open to any thoughts.
Thanks
Boosie






RE: Making rope!!
http://groups.google.com/groups?dq=&hl=en&lr=&ie=UTF-8&threadm=7ff76910.0308121613.7ce64e34%40posting.google.com&prev=/groups%3Fhl%3Den%26lr%3D%26ie%3DUTF-8%26group%3Dcomp.cad.solidworks