How to print an odd file
How to print an odd file
(OP)
Hello, guys. I know this isn't strictly SW related, but I usually use SW to open any drawing files we receive. However, a rather large customer has given us a CD full of drawings of all differing types, some of which are scanned copies of 30+ year old drawings. Several are .plt files, and I have no clue how to open them.
Any ideas?
Thanks!
Any ideas?
Thanks!






RE: How to print an odd file
Try maybe looking at Autovue. There maybe a link here that may help Thread559-64030
Regards,
Scott Baugh, CSWP

3DVision Technologies
http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
When in doubt, always check the help
RE: How to print an odd file
RE: How to print an odd file
RE: How to print an odd file
Regards,
Scott Baugh, CSWP

3DVision Technologies
http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
When in doubt, always check the help
RE: How to print an odd file
RE: How to print an odd file
Time to get out the big guns
Scott Baugh, CSWP

3DVision Technologies
http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
When in doubt, always check the help
RE: How to print an odd file