Need LOW cost shakers as consumables, please
Need LOW cost shakers as consumables, please
(OP)
Hello folks,
I am in work on a project that needs a shaker as a consumable (cheap-one use, single sinusoidal mode,small, 500-1000 hour life, 1-2 hr continuous run, 2.0 lbf pk, max disp. < 1 inch). The FG142 by Labworks http://www.labworks-inc.com/products/shakers/FG_142.htm would be great but they are cost prohibitive. This in developement of a product to be made available to consumers for a medical device utilized at home (12vdc). ANY assistance as to where I might look would be greatly appreciated.
Thank you ahead of time,
B.J.
I am in work on a project that needs a shaker as a consumable (cheap-one use, single sinusoidal mode,small, 500-1000 hour life, 1-2 hr continuous run, 2.0 lbf pk, max disp. < 1 inch). The FG142 by Labworks http://www.labworks-inc.com/products/shakers/FG_142.htm would be great but they are cost prohibitive. This in developement of a product to be made available to consumers for a medical device utilized at home (12vdc). ANY assistance as to where I might look would be greatly appreciated.
Thank you ahead of time,
B.J.





RE: Need LOW cost shakers as consumables, please
M
RE: Need LOW cost shakers as consumables, please
The travel is not as important as the rate and pforce.
Hey, thanks again for the response.
B.J.