×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

25-foot span -- what materials to use

25-foot span -- what materials to use

25-foot span -- what materials to use

(OP)
After posting this question with too many details previously, I will try the basics.

I am looking for a material (angle iron, box steel, or similar) to span a 20-foot length without sagging. It will only need to support its own weight + 15% or so. Weight is an issue so lighter is better.
Great site, by the way.

RE: 25-foot span -- what materials to use

Try an Aluminum Association I-beam or an aluminum i-beam made from two formed channels back-to-back.  Where is the load?  What is is supporting?  What is under it?

RE: 25-foot span -- what materials to use

I suggest a piece of cotton thread.

The question is meaningless, any real system that is non-active will sag.

What is the real load?

Cheers

Greg Locock

RE: 25-foot span -- what materials to use

Rule of the thumb for acceptable deflection is L/240 and to get this, the beam depth must be about L/20 to L/24, where L is the span in inches. The member must be symetric about the vertical axis or the member will twist when subjected to loading. A light gauge steel joist about 14" high should be about what is required for 1 1/4 " deflection. Now I am a mechanical engineer and I learned this from another mechanical engineer. Suprisingly not many structural engineer seem to be aware of this. I am curious to know if other structural engineers can refute or validate the above rule of thumb.

RE: 25-foot span -- what materials to use

Say is your post 25 ft span or 20 ?. My reply is for 25' span.

RE: 25-foot span -- what materials to use

You will always get deflection, it is only a matter of degree.  You best bet is to have a beam arched to an amount of the expected deflection.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources