Double Cage Equivalent of Deep Bar Rotor Motor
Double Cage Equivalent of Deep Bar Rotor Motor
(OP)
I have a set of parameters for an induction motor with a deep bar rotor. This includes the starting and running values of the rotor single cage equivalent circuit.
Can any body advise me of a straightforward method of converting these parameters to the resistance and reactance of a double cage induction motor, which has a torque speed curve similar to that of the deep bar machine. I've been getting tied up in the maths, and I suspect that somebody must have done this before now.
Can any body advise me of a straightforward method of converting these parameters to the resistance and reactance of a double cage induction motor, which has a torque speed curve similar to that of the deep bar machine. I've been getting tied up in the maths, and I suspect that somebody must have done this before now.





RE: Double Cage Equivalent of Deep Bar Rotor Motor
http://www.eagle.ca/~cherry/inspect.htm
for Inspect that will calculate the electrical equivalent circuit parameters for you,
http://www.scansims.org/sims1999/Al-Jufout.pdf
for double-cage induction motor,
http://www.ee.sc.edu/classes/Spring03/elct553/15%20Induction%20motor%20analysis.pdf
for electrical equivalent circuit and characteristics.