Piping Working Pressures & Corrosion Allowance
Piping Working Pressures & Corrosion Allowance
(OP)
I would like to find a full updated chart for the maximum
allowable working pressure for welded and threaded carbon
steel pipe (all sizes & schedules) with corrosion factors from 0 CA to 1/4" CA
allowable working pressure for welded and threaded carbon
steel pipe (all sizes & schedules) with corrosion factors from 0 CA to 1/4" CA





RE: Piping Working Pressures & Corrosion Allowance
You can consulting the ANSI B31.G You can To calculate the MAOP Or Stress remaining for Deep of pitting or length of corrosion.
Regards
Jorge
jorge@tecnicontrol.com.co
RE: Piping Working Pressures & Corrosion Allowance
RE: Piping Working Pressures & Corrosion Allowance
Dear Members
Can anyone help me with corrosion allowances for alloy625 pipes in 250mm and 300mm diameters, both Sch10
Any assistance would be appreciated.
tia
LabOwl