Determination of Potier Reactance
Determination of Potier Reactance
(OP)
Hi Folks,
Looking through a shop test procedure for generator, I have problems trying to setermine how they calculated the Potier Reactance. i have looked at IEC 60034-4 where it is specified, but it is still not clear to me,. any help on this would be greatly appreciated,
Kind regards
Flashover
Looking through a shop test procedure for generator, I have problems trying to setermine how they calculated the Potier Reactance. i have looked at IEC 60034-4 where it is specified, but it is still not clear to me,. any help on this would be greatly appreciated,
Kind regards
Flashover
Flashover






RE: Determination of Potier Reactance
i am badly stuck on this one, i have searched the web!
Flashover
RE: Determination of Potier Reactance
IEEE 115-1983 and 115A-1987 standards for synchoronous machines?
RE: Determination of Potier Reactance
regards
flashover
Flashover
RE: Determination of Potier Reactance
Both cited IEEE standards seem to have been combined and superseded by IEEE Std 115-1995
"Potier reactance" is indexed in Annex 5A
A PDF version can be purchased through http://shop.ieee.org/store/
RE: Determination of Potier Reactance
RE: Determination of Potier Reactance
my email is
happyout1976@yahoo.com
kind regards
flashover
Flashover
RE: Determination of Potier Reactance
Flashover, no personal offense is meant, but others at this board have "head offices" with their seemingly peculiar demands to deal with, also. If one is going to take on work involving systems that cost many, many thousands of dollars—then a copyrighted publication costing $150 should be considered almost inconsequential if project completion and purchase-order line-item specifications have any consequence.
RE: Determination of Potier Reactance
RE: Determination of Potier Reactance
Now what?
RE: Determination of Potier Reactance
The Electrical Machines Problem Solver, Staff of Research and Education Association, 505 8th Avenue, New York, NY 10018, USA
e.g.
Problem 7-24:
Armature Leaking Reactance Xa=(XI voltage drop)/rated current
(from Potier Diagram)
RE: Determination of Potier Reactance
Busbar:- I understand your point and its quiet correct,
however i am only a graduate engineer in a new job and alot of this work is quiet new to me, i wish to succeed in whatever way possible. I have found this site most invaluable and recommend it to friends reguarly. I apologise if u feel i was on the cheap here looking for advise, never my attention, just an eagerness to find the answer to my post as quick as possible.
DougMSOE:- thanks for trying to mail me details, my email address is happyout1976@yahoo.co.uk and not .com as i posted earlier, very sorry for the inconvience. if that does not work, then i will have to open a new account or something.
Thanks very much
kind regards
Flashover
Flashover
RE: Determination of Potier Reactance
There is a corollary to "...whatever way possible" and "...quick as possible."
"Failure to plan on your part does not constitute an emergency on my part."
Publication searches may not seem glamorous or exciting, but can be a good way to save time and money—and occasionally—maybe even a career.
RE: Determination of Potier Reactance
its only for my own iformation and study. I saw it on a report from a generator test and wished to follow up on it. dont worry about it, i will try and get the standards at some later stage,
kind regards
flashover
Flashover
RE: Determination of Potier Reactance
i am interested to know what u had on email for me, if you try sending it to happyout1976@yahoo.co.uk that would be great
Thanks
Flashover
RE: Determination of Potier Reactance
Flash
Flashover