Start up error in mfc42.dll
Start up error in mfc42.dll
(OP)
I have Just startsd getting the 'Sldwrks has caused an error in MF.DLL' in SW2003 and closes. I do as the error box explains - restart - I have hit that button so many times that I've almost got bleeding fingers, I have updated my video driver and checked the versions of the affected files and all seams to be in order. I have uninstalled and reinstalled but to no avail.
can someone please tell me whats wrong with this damn computer or application.
800 mhz Pent3,
128 meg ram,
Win. ME.
Trident 8 meg Video card.
can someone please tell me whats wrong with this damn computer or application.
800 mhz Pent3,
128 meg ram,
Win. ME.
Trident 8 meg Video card.






RE: Start up error in mfc42.dll
RE: Start up error in mfc42.dll
Regards,
Scott Baugh, CSWP
3DVision Technologies
http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
When in doubt, always check the help
RE: Start up error in mfc42.dll
Reinstall Solidworks. It should work fine.
You shouldn't need to copy these files manually. But just in case you can download them from Microsoft, or send me your email and I will send them to you,
Good luck.
jevakil@mapdi.com
One nuclear bomb can ruin your whole day.
RE: Start up error in mfc42.dll
RE: Start up error in mfc42.dll
Thread559-58653 look at my post on Computer hardware
http://www.solidworks.com/pages/services/videocardtesting.html - get a card that is in the green - I was going to look up your card, but I don't even know who makes a trident card.
Good info in these threads - Similar discussion
Thread559-14973
Thread559-38600
Regards,
Scott Baugh, CSWP

3DVision Technologies
http://www.3dvisiontech.com
http://www.scottjbaugh.com
FAQ731-376
When in doubt, always check the help