3D to 2D UCS
3D to 2D UCS
(OP)
A drawing has a 3D ucs developed w/ acad 2000. Drawing is now worked on w/acad 20002. 3D ucs still remained eventho we made several attempts to change to 2D ucs via : view p.d. menu > display> ucs icon> properties> ucs icon dialogue box: 2d selection.
What can be done to get the 2d ucs???
What can be done to get the 2d ucs???





RE: 3D to 2D UCS
UCSICON->Properties->2D
I, personally, like the 3D UCSICON. It's less intrusive.
RE: 3D to 2D UCS
Regards, Lothar
Win NT4.0 (SP6),
ACAD 2000i (SP2), ADT 3.0 (SP3),
ACAD 2002, ADT 3.3,
OCÈ 5200
RE: 3D to 2D UCS
Is it possible that once a 2D file is opened into a 3D environment, you can not change the 3D UCS back into a 2d format? Remember the 3D UCS is of the AutoCAD 2000 configuration that I am trying to change eventho the program is currently running on 2002.
RE: 3D to 2D UCS
is it possible to get a cut out of Your *.dwg? Maybe I understand Your Problem after that...?
Kramer24@freenet.de
Lothar
Win NT4.0 (SP6),
ACAD 2000i (SP2), ADT 3.0 (SP3),
ACAD 2002, ADT 3.3,
OCÈ 5200
RE: 3D to 2D UCS
You keep saying UCS, is it your UCS that's the problem or the UCSICON?
The icon is the little axis arrow thingie in the lower left corner of the viewport.
Your UCS is the USER COORDINATE SYSTEM. IF that's what you're having trouble with, you need to clarify it a little more. Is it just your VIEWPOINT that's cockeyed, or is the UCS something other than WORLD?
RE: 3D to 2D UCS
RE: 3D to 2D UCS
Thanks to all for your input.
RE: 3D to 2D UCS
Thanks to all for your input.
RE: 3D to 2D UCS
@urgen: one trick-one star
regards Lothar
Win NT4.0 (SP6),
ACAD 2000i (SP2), ADT 3.0 (SP3),
ACAD 2002, ADT 3.3,
OCÈ 5200