General Material Data Handbook
General Material Data Handbook
(OP)
I am a graduate Mechanical Engineer and would find it useful to have data book on material properties.
i.e. UTS, Yield Strees, 0.2% Yield Strength, Modulus Rigidity/Elasticity.
Many books generalise on say just aluminium or just brass, instead of different grades.
Any one have possible suggestions. Not too expensive either.
Grateful for any feedback.
i.e. UTS, Yield Strees, 0.2% Yield Strength, Modulus Rigidity/Elasticity.
Many books generalise on say just aluminium or just brass, instead of different grades.
Any one have possible suggestions. Not too expensive either.
Grateful for any feedback.





RE: General Material Data Handbook
http://www.matweb.com/main.htm
My opinion, you will find here lot of materials
Irwin
RE: General Material Data Handbook
There are tables with data for various alloys and a link page exists to other materials related sites.
Mike Van Voorhis
MJVanVoorhis@Compuserve.com
RE: General Material Data Handbook
Also, the "ASM Metals Reference Book" is a good source for the information you requested.
GEFought
jfought@invacare.com