emulsion breaker emulsion breaker arbo (Chemical) (OP) 16 Mar 03 04:08 does anyone know a good formulation for the quick emulsion breaking of heavy slobs in refinery containing 40 g/l salt -10 à 15% water which has to be reduced to 1% max. thks RE: emulsion breaker dhurjati (Chemical) 27 May 03 23:36 i am doing 2 phase flow experiments with kerosene water. in their interphase in the separator there is a lot of emulsion which is hardly removable. though i applied salt methods improvement become reverse i. e. emulsion become more stable. so what to do. RE: emulsion breaker Leoner (Chemical) 30 Jul 03 09:30 Hello, I'm from Venezuela. I work in an ethylene/propylene plant. I'm studying how to brek an oil/water emulsion in the water process system. Cracked gas goes into a water scrubbing tower, then the water absorbs the heavy and light oil contained in gas process. This stream is sent to an oil/water separator where water is recycled to the tower. This water forms an emulsion with the oil phase. I need to solve it. I need some information about this problem, I request your help. Please send me papers, forums, etc.