×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Modal analysis with Ls-Dyna

Modal analysis with Ls-Dyna

Modal analysis with Ls-Dyna

(OP)
Could anyone give me some hints (eg. example file) to get the natural frequency? It is said to use implict, but how?
Thanks.

RE: Modal analysis with Ls-Dyna

(OP)
Is there really nobody can help? I don't think so.
maybe i have sent a too simple question?

Ok, let me draw the thread farther.
I found, since the version of 960, it is possible to use the keywords *control_implicit_eigenvalue...
now i got the values, but how to judge they could be correct?
and
but how could the Modal Analysis be done with also contact definitions? and further more possiblely with strain rate?
or ABAQUS?

I really appreciate any advice!
thanks in advance.

RE: Modal analysis with Ls-Dyna

Hi,

Give me your email, will send you example file for eigenvalue analysis using Dyna.

RE: Modal analysis with Ls-Dyna

Sorry for the OT answer, but I think that if dharni had included the example file directly in his post he could have been useful to many more people tan just korper. What should this forum be intended to but to provide an open community where all members can take advantage of the experience of other colleagues?
I mean no polemics, truly.

Cheers



Spirit


'Ability is 10% inspiration and 90% perspiration.'

RE: Modal analysis with Ls-Dyna

(OP)
Thanks for dharni and other replys!
I have got the .k file and test functioned.
sorry for my coming back late and repling.
see below the file include. (I suppose i could post it)

Due to such a challenge, my question will lead to the contact algorithm and defining the boundary conditions.

Some guy just told me it is impossible to get the natural frequencies. and 'cause it contrary to such math. modelling.

hope that clear and appreciate advices.

thanks and regards!
===========================================================
*KEYWORD
$
*TITLE
cantilevered shell strip w/ end moment
$============================================
*CONTROL_IMPLICIT_GENERAL
$   imflag       dt0      iefs
        -9    0.0005         0
*CONTROL_IMPLICIT_NONLINEAR
$  nlsolvr    ilimit    maxref     dctol     ectol     rctol     lstol
         0         0         0      0.00      0.00         0         0   
$    dnorm   divflag   inistif
         0         0         0
*CONTROL_IMPLICIT_LINEAR
$   lsolvr   prntflg    negeig
         0         0         0
*CONTROL_IMPLICIT_AUTO
$    iauto    iteopt    itewin     dtmin     dtmax
         0         0         0      0.00         0
$
*CONTROL_IMPLICIT_EIGENVALUE
$      neig
         5
$============================================
*CONTROL_TERMINATION
     0.025
$
*DATABASE_BINARY_D3PLOT
    0.0001
$============================================
$
$  Define Material
$
$============================================
*MAT_ELASTIC
         1 7.000E-04 3.000E+07 3.000E-01
$
*SECTION_SHELL
         1         6 8.333E-01 3.000E+00 3.000E+00 0.000E+00         0
 1.000E-01 1.000E-01 1.000E-01 1.000E-01 0.000E+00
$
*PART
cantilevered shell     
       1       1       1       0       0       0       0       0      
$
$--------------
$
*LOAD_NODE_POINT
$     nsid       dof      lcid        sf    
        16         7        98       0.5
        32         7        98       1.0
        48         7        98       0.5
$============================================
$
$   DEFINE_CURVE
$
$============================================
*DEFINE_CURVE
         9
 0.00000, 1.0
 0.00999, 1.0
 0.01000, 0.0
 1.00000, 0.0
*DEFINE_CURVE
        98
  0.00000,   0.0
  0.01000, 150.0
  0.01001,   0.0
  1.00000,   0.0
$============================================
$
$   Deifine Nodes
$
$============================================
*NODES
       1 0.000000000E+00 0.000000000E+00 0.000000000E+00       7       7
       2 3.333333433E-01 0.000000000E+00 0.000000000E+00       0       0
       3 6.666666865E-01 0.000000000E+00 0.000000000E+00       0       0
       4 1.000000000E+00 0.000000000E+00 0.000000000E+00       0       0
       5 1.333333373E+00 0.000000000E+00 0.000000000E+00       0       0
       6 1.666666627E+00 0.000000000E+00-1.110223025E-16       0       0
       7 2.000000000E+00 0.000000000E+00 0.000000000E+00       0       0
       8 2.333333254E+00 0.000000000E+00-1.110223025E-16       0       0
       9 2.666666746E+00 0.000000000E+00 0.000000000E+00       0       0
      10 3.000000000E+00 0.000000000E+00-1.110223025E-16       0       0
      11 3.333333254E+00 0.000000000E+00 0.000000000E+00       0       0
      12 3.666666746E+00 0.000000000E+00 0.000000000E+00       0       0
      13 4.000000000E+00 0.000000000E+00 0.000000000E+00       0       0
      14 4.333333492E+00 0.000000000E+00 0.000000000E+00       0       0
      15 4.666666508E+00 0.000000000E+00 0.000000000E+00       0       0
      16 5.000000000E+00 0.000000000E+00 0.000000000E+00       0       0
      17 0.000000000E+00 0.000000000E+00 5.000000000E-01       7       7
      18 3.333333433E-01 0.000000000E+00 5.000000000E-01       0       0
      19 6.666666865E-01 0.000000000E+00 5.000000000E-01       0       0
      20 1.000000000E+00 0.000000000E+00 5.000000000E-01       0       0
      21 1.333333373E+00 0.000000000E+00 5.000000000E-01       0       0
      22 1.666666627E+00 0.000000000E+00 5.000000000E-01       0       0
      23 2.000000000E+00 0.000000000E+00 5.000000000E-01       0       0
      24 2.333333254E+00 0.000000000E+00 5.000000000E-01       0       0
      25 2.666666746E+00 0.000000000E+00 5.000000000E-01       0       0
      26 3.000000000E+00 0.000000000E+00 5.000000000E-01       0       0
      27 3.333333254E+00 0.000000000E+00 5.000000000E-01       0       0
      28 3.666666746E+00 0.000000000E+00 5.000000000E-01       0       0
      29 4.000000000E+00 0.000000000E+00 5.000000000E-01       0       0
      30 4.333333492E+00 0.000000000E+00 5.000000000E-01       0       0
      31 4.666666508E+00 0.000000000E+00 5.000000000E-01       0       0
      32 5.000000000E+00 0.000000000E+00 5.000000000E-01       0       0
      33 0.000000000E+00 0.000000000E+00 1.000000000E+00       7       7
      34 3.333333433E-01 0.000000000E+00 1.000000000E+00       0       0
      35 6.666666865E-01 0.000000000E+00 1.000000000E+00       0       0
      36 1.000000000E+00 0.000000000E+00 1.000000000E+00       0       0
      37 1.333333373E+00 0.000000000E+00 1.000000000E+00       0       0
      38 1.666666627E+00 0.000000000E+00 1.000000000E+00       0       0
      39 2.000000000E+00 0.000000000E+00 1.000000000E+00       0       0
      40 2.333333254E+00 0.000000000E+00 1.000000000E+00       0       0
      41 2.666666746E+00 0.000000000E+00 1.000000000E+00       0       0
      42 3.000000000E+00 0.000000000E+00 1.000000000E+00       0       0
      43 3.333333254E+00 0.000000000E+00 1.000000000E+00       0       0
      44 3.666666746E+00 0.000000000E+00 1.000000000E+00       0       0
      45 4.000000000E+00 0.000000000E+00 1.000000000E+00       0       0
      46 4.333333492E+00 0.000000000E+00 1.000000000E+00       0       0
      47 4.666666508E+00 0.000000000E+00 1.000000000E+00       0       0
      48 5.000000000E+00 0.000000000E+00 1.000000000E+00       0       0
$=======================================================================
*ELEMENT_SHELL
       1       1       1      17      18       2
       2       1       2      18      19       3
       3       1       3      19      20       4
       4       1       4      20      21       5
       5       1       5      21      22       6
       6       1       6      22      23       7
       7       1       7      23      24       8
       8       1       8      24      25       9
       9       1       9      25      26      10
      10       1      10      26      27      11
      11       1      11      27      28      12
      12       1      12      28      29      13
      13       1      13      29      30      14
      14       1      14      30      31      15
      15       1      15      31      32      16
      16       1      17      33      34      18
      17       1      18      34      35      19
      18       1      19      35      36      20
      19       1      20      36      37      21
      20       1      21      37      38      22
      21       1      22      38      39      23
      22       1      23      39      40      24
      23       1      24      40      41      25
      24       1      25      41      42      26
      25       1      26      42      43      27
      26       1      27      43      44      28
      27       1      28      44      45      29
      28       1      29      45      46      30
      29       1      30      46      47      31
      30       1      31      47      48      32
*END






Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources