×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Springs

Springs

Springs

(OP)
Hi All

Probably a simple question but I just can't find the answer. I'm trying to create a suspension arrangement using a spring that has been concentrically mated to the surface of the shaft that it surrounds. The main shaft is pierced at the top end by another shaft that is in a fixed position, so it looks like a 'T' assembly. When the shaft that makes the top of the 'T' is pushed down I want the spring to compress. How do I achieve this?

RE: Springs

Rock,

you are not going to achieve this with solidworks if it is the animation you are looking for... if you are interested in seeing how the forces edforme the spring then you need to be looking at an fea solution for that scenario.... SWX2003 has something called CosmosXpress that will handle simple things like this, BUT it does not do assemblies if you want to do assemblies you need to buy the add-in CosmosWorks or another FEA solution to help you with this.

if you could care less about the numbers (stress/strain,etc) and you want to simulate the motion of the spring then you could do it with multiple configurations and switch through them "frame by frame" so to speak... in other words you could take a screen shot of it in each configuration and save it to either an animated gif file, or perhaps use something to create an avi feame by feame.... very time consuming though because you need to make MANY frames to make it look good...

I suppose that you could define the spring using an incontext relationship but I am not sure what type of spring you have their... lets say we have a coil spring which is basically a sweep around a helical curve.  

I would draw a construction line "in context" with the assembly to show the total spring height between the other components.  Then you can put a reference dimension on it.

Create your helix using "height" and number of turns.  give it a height and the number of turns and complete the helix.

Create an equation that drives the height dimension in the helix definition and make it equal to the ref dimension

create your sweep profile on a plane normal to the curve(helix)  then sweep away

if you move the assembly and you have sonctrained the construction line correctly the model should update and show the spring in different heights AFTER you rebuild the assembly... its still not going to be "video quality" though

hope that helps a little

Regards,
Jon
jgbena@yahoo.com

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources