pressure vessel design
pressure vessel design
(OP)
Could anyone help me?
I wish to design a horizontal pressure supported on saddles. The vessel must have inlet & outlet nozzles with a manyway, capable of storing 12 cubic metres of petrol, with a vapour pressure of approx 0.8 bar. How do i proceed to pick my way through PD 5500, which parts are relevant to my problems and how do i calculate the fundamental variables required for the formula used in the design.
please help
John
I wish to design a horizontal pressure supported on saddles. The vessel must have inlet & outlet nozzles with a manyway, capable of storing 12 cubic metres of petrol, with a vapour pressure of approx 0.8 bar. How do i proceed to pick my way through PD 5500, which parts are relevant to my problems and how do i calculate the fundamental variables required for the formula used in the design.
please help
John





RE: pressure vessel design
You can find information you need in the links below.
1. www.disasu.com
2. www.chempute.com at the Mechanical Engineering part
TANK API 650/653 oil storage tank design and analysis
hope this help.
best wishes.
APACHI
RE: pressure vessel design
Go to CODEWARE.COM THE HOME OF COMPRESS IF YOU NEED HELP
http://www.codeware.com/consult.html
Leonard@thill.com
www.thill.biz
RE: pressure vessel design
Sharing knowledge is a way to immortality