Design of 0-30V and 0-30A Power Supply
Design of 0-30V and 0-30A Power Supply
(OP)
i have to design a fully stabilised power supply having input of 220V AC and output of 0-30V variable and 0-30A variable using power MOSFETs.
When was the last time you drove down the highway without seeing a commercial truck hauling goods?
Download nowINTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
Design of 0-30V and 0-30A Power Supply
|
RE: Design of 0-30V and 0-30A Power Supply
Lots of things need to be answered:
Isolation of primary to secondary;
EMC regulations to be complied with;
Environmental requirements commercial/industrial/military/automotive?
Size, weight;
Target efficiency if this is an issue;
Type of control or man/machine interface: Manual, computer links - RS232 or Internet or what;
Transient performance;
Target cost;
Likely manufacturing quantities 1, 10, 100s or large;
Likely location of manufacture and availability of plant and equipment and labour;
Level of automation available to assist design and/or manufacture;
Why not just buy one?
Best regards