help with windings
help with windings
(OP)
i have a stator for a brushless dc motor with about 60% slot fill
need help winding it
single tooth
need help winding it
single tooth
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: help with windings
<nbucska@pcperipherals.com>
RE: help with windings
15-18 guage wire
RE: help with windings
( if later, give both )
<nbucska@pcperipherals.com>
RE: help with windings
12 v
RE: help with windings
<nbucska@pcperipherals.com>
RE: help with windings
no i need to find a company that does in slot windings on a mass production basis
RE: help with windings
http://www.thomasregister.com
and type Coils: Copper (Electrical, Motor, Wire Winding Types) under Product or Service which will return 22 companies to contact for windings and a mass production.
RE: help with windings
RE: help with windings
I'm working in such industry?
contact me at gjovanoska@mt.net.mk
RE: help with windings
16-18 guage wire
3 in hand
9turns
skew of 1/2 slot ( 9 slots total)