Black Zirconia
Black Zirconia
(OP)
I am interested in injection molding a product out of "Black Zirconia". Can anyone help with a method for doing thisand where to obtain raw materials?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Black Zirconia
harry.hodgson@dynacer.com
RE: Black Zirconia
How It Works
The powder to be used is filled into the hopper of the injection moulding machine.It is then pushed forward by a ram in the machine to the heating cylinder of the injection moulding machine,where the powder will be heated.After heating the powder,it is then forced into a mould and allowed to cool.After some time when the powder must have cooled in the mould,the mould is opened and the moulded part is knocked out.
Sorry I don't think is possible for me to show you the injection mould diagram here,but if you still insist on getting the diagram,look for any polymer text book I believe you will see the diagram there.
As for where to get the raw materials,why not mail the guy untop with his e-mail address to see whether he can be of help.
RE: Black Zirconia
www.formatec.nl
RE: Black Zirconia