Nozzle design
Nozzle design
(OP)
HELLO;
You will find in attached the picture of nozzle with details in question.
Please help me to find out with my issue; my questions are :
1) What’s the formula utilized to find the value of L=318,9 mm, and what “L” represent in this figure??
2) I find in the report of COMPRESS that the Lpr=348.85 mm, what’s the difference between L and Lpr?
3) How they calculate h=197.1 mm? as I understand is the length of the hub of nozzle.
my salutations
You will find in attached the picture of nozzle with details in question.
Please help me to find out with my issue; my questions are :
1) What’s the formula utilized to find the value of L=318,9 mm, and what “L” represent in this figure??
2) I find in the report of COMPRESS that the Lpr=348.85 mm, what’s the difference between L and Lpr?
3) How they calculate h=197.1 mm? as I understand is the length of the hub of nozzle.
my salutations





RE: Nozzle design
forum1259: Codeware: COMPRESS - Professional forum and technical support for engineers for Codeware: COMPRESS. Includes problem solving collaboration tools.
The problem with sloppy work is that the supply FAR EXCEEDS the demand