×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

LEL and HEL

LEL and HEL

LEL and HEL

(OP)
Hi
Need we clarity in the LEL and HEL of gasoline . What type of instrument is required for measuring the LEL and HEL in an AIFR installed gasoline storage tank?What is the permissible limit of the levels and what will happen if the readings cross the permissible limit?
Thanks

RE: LEL and HEL

To measure explosive limits you need a gas detector capable of measuring this type of vapour and outputting, normally, in % of LEL. Hence a reading of 50% means you're 50% towards getting to the lower limit. Often work stops when you get to 5% of LEL.

HEL is normally just used when you're justifying something based on the concentration of gasoline is well above the HEL and hence a hazard won't exist. However usually at some point the atmosphere needs to move from 0% ( empty, new condition) to above the HEL, so it's really a bit academeic.

No idea what AIFR is (Aluminium Internal Floating Roof?). No idea why you want to measure gasoline vapour in this space - everyone just assumes it is a Zone 0 and acts accordingly. Hence there are no "permissible levels" other than the 5% of LEL I was talking about which is the limit for doing work in a potentially explosive atmosphere. No one does work inside a storage tank which contains gasoline, even with an internal roof. Equally no one actually bothers to measure gasoline vapour inside such a space either - there's no point.

You might need to measure the vapour coming out of the tank or drifting somewhere else on site, but not in the tank itself, IMHO.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources