Rectangular powder compaction die.
Rectangular powder compaction die.
(OP)
Hello Everybody,
I am fabricating glass+ceramic samples by powder compaction method. I have a cylindrical die that I am using for making pellets of 5.00mm thickness and 13.00mm diameter. However, I am looking for a rectangular powder compaction die wherein I can make bars of 2.5" length with 5-10mm thickness. Can anyone of direct me to a vendor whole sell such type of die? Anything more than 2.5" length would do.
Thanks and your help is much appreciated
Padmanapan
I am fabricating glass+ceramic samples by powder compaction method. I have a cylindrical die that I am using for making pellets of 5.00mm thickness and 13.00mm diameter. However, I am looking for a rectangular powder compaction die wherein I can make bars of 2.5" length with 5-10mm thickness. Can anyone of direct me to a vendor whole sell such type of die? Anything more than 2.5" length would do.
Thanks and your help is much appreciated
Padmanapan





RE: Rectangular powder compaction die.
How wide do you want them?
In hard materials these are usually segmented dies that are held in a steel case.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube