DC Converter Simulation
DC Converter Simulation
(OP)
I wish to model a large AC/DC thyristor converter and DC motor for a load flow study. Can anyone point me to any web resources which may get me started on this?
I want to be able to find out (using the motor's test data and specification sheets) the following:
1. System speed/torque curves for different converter voltage limits
2. Maximum regeneration capacity for given supply fault levels.
3. Loading on the main supply, power factor and harmonic emission on to the main supply.
Amongst other things.
I want to be able to find out (using the motor's test data and specification sheets) the following:
1. System speed/torque curves for different converter voltage limits
2. Maximum regeneration capacity for given supply fault levels.
3. Loading on the main supply, power factor and harmonic emission on to the main supply.
Amongst other things.





RE: DC Converter Simulation
http://www.integratedsoft.com/caspoc/power_electronics.asp
etc. for more info.
Also, there are electrical journals covering the simulation, e.g.
http://www.iee.org
RE: DC Converter Simulation
RE: DC Converter Simulation