flange raised face height tolerance
flange raised face height tolerance
(OP)
thread408-205579: Flange Raised Face Height Tolerance
ASME PCC-2-2011
3.1 Raised Face
Under-thickness of a raised face due to refinishing
shall be acceptable, provided the minimum finished
height of the raised face is 0.8 mm (0.031 in.).
ASME PCC-2-2011
3.1 Raised Face
Under-thickness of a raised face due to refinishing
shall be acceptable, provided the minimum finished
height of the raised face is 0.8 mm (0.031 in.).




