INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

GOR

GOR

(OP)
Hi, There is some example about separator sizing. I don't know how to define condensate flow rate from given GOR
Given parameters:
Gas = 10 MMscfd
GOR = 10 bbl/MMscf condensate
no water produced.
Condensate density 700 kg/m3
Gas is 0.02 CO2, 0.9 C1, 0.01 C2, 0.02 C3, 0.02 iC4, and 0.03 C5

RE: GOR

What you've written isn't GOR,it's the inverse which is CGR or condensate to gas ratio.

At 10 bbls / MMscf and with 10 mmscf you will have 100 bbls per day.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

RE: GOR

(OP)
I knew something is wrong. Thank you so much for your help

RE: GOR

Thing to note is that these numbers are at "standard" conditions". The actual amount you get in a separator can be more or less depending on pressure, temperature and composition.

Take a volume of "condensate" at 70 bar and then flash it off to atmospheric pressure and your volume of condensate could reduce by 70% or more as the light ends flash off and dissolved gas is removed. Hence everyone gets exited by volumes being "lost", but in reality the total mass remains the same, just in a different state ( gaseous) and not liquid.

You need HYSYS or something similar to get actual volumes being encountered.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources


Close Box

Join Eng-Tips® Today!

Join your peers on the Internet's largest technical engineering professional community.
It's easy to join and it's free.

Here's Why Members Love Eng-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close