How to choose material for well head equipements
How to choose material for well head equipements
(OP)
I want to make purchasing ordre , but how to make choise material for well head equipements.
Thanks
Thanks
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
How to choose material for well head equipements
|
RE: How to choose material for well head equipements
Steve Jones
Corrosion Management Consultant
http://www.linkedin.com/pub/8/83b/b04
All answers are personal opinions only and are in no way connected with any employer.
RE: How to choose material for well head equipements
NACE MR 0175 has specs for sour service and other materials used in corrosive environments. Based on calculated partial pressure some companies might have other (usually more stringent)requirements on material used.
Provincial and government regulations have to be taken in account as well. In AB, a critical sour well has to have a PSL3 WH, even-though API 6A recommends a PSL2 WH.
If you speak with WH manufacturer they will know this stuff and head you in the right direction.
RE: How to choose material for well head equipements
Steve Jones
Corrosion Management Consultant
http://www.linkedin.com/pub/8/83b/b04
All answers are personal opinions only and are in no way connected with any employer.