Workstation to work with CATIA
Workstation to work with CATIA
(OP)
I'm looking for a new Workstation to work with CATIA. I don't know much about workstations, I only use them.
I draw metal stamping dies progressive transfer in full parametric way, so this implies lot of memory from Workstation. The update time is really important. By the end of the project is quite normal that I need to wait 10 minutes, or more, for an update. It's huge! So I'm looking for a Workstation that can improve this.
Multiple processor or clock speed (as far as I know catia only supports one processor)?
Memory what do you think?
Any special characteristics?
I draw metal stamping dies progressive transfer in full parametric way, so this implies lot of memory from Workstation. The update time is really important. By the end of the project is quite normal that I need to wait 10 minutes, or more, for an update. It's huge! So I'm looking for a Workstation that can improve this.
Multiple processor or clock speed (as far as I know catia only supports one processor)?
Memory what do you think?
Any special characteristics?
Tiago Figueiredo
Tooling Engineer
Youtube channel:
https://www.youtube.com/channel/UC1qdlBeJJEgMgpPLV...





RE: Workstation to work with CATIA
http://www.3ds.com/support/certified-hardware/
Drew Mumaw
www.textsketcher.com
www.drewmumaw.com
RE: Workstation to work with CATIA
But there is an huge amount of possible workstation.
I don't know where to start.
Tiago Figueiredo
Tooling Engineer
Youtube channel:
https://www.youtube.com/channel/UC1qdlBeJJEgMgpPLV...
RE: Workstation to work with CATIA
Regards
Fernando
https://picasaweb.google.com/102257836106335725208 - Romania
https://picasaweb.google.com/103462806772634246699... - EU
RE: Workstation to work with CATIA
beeing honest there is so many options that i'm completely lost. I dassault websit there is so much option that i'm lost. there is an huge different processors graphics...
For example, which of these processors would you prefer to work in catia (just for modelling, no FEA, no Rendering, no motion), and Why?
-Intel® Xeon® E5-2637 v4 (3.5 GHz, 15 MB cache, 4 cores, Intel® vPro™)
-Intel® Xeon® E5-2687W v3 (3.1 GHz, 25 MB cache, 10 cores, Intel® vPro);
-Intel® Xeon® E5-2699 v4 (2.2 GHz, 55 MB cache, 22 cores, Intel® vPro™);
Tiago Figueiredo
Tooling Engineer
Youtube channel:
https://www.youtube.com/channel/UC1qdlBeJJEgMgpPLV...
RE: Workstation to work with CATIA
Regards
Fernando
https://picasaweb.google.com/102257836106335725208 - Romania
https://picasaweb.google.com/103462806772634246699... - EU
RE: Workstation to work with CATIA
indocti discant et ament meminisse periti
RE: Workstation to work with CATIA
Tiago Figueiredo
Tooling Engineer
Youtube channel:
https://www.youtube.com/channel/UC1qdlBeJJEgMgpPLV...