Volume in NX
Volume in NX
(OP)
Hi
I need to measure volume of a body after every step during a milling process. For explm.
as you can see in the Image- i want to drill two holes in a solid cube one after another and in between
i have to measure how much volume i have deducted in each step.
I have tried to save as IPW part, but i cant do anything rather than visualizing.
Have anyone an Idea. thanks in advance.
I need to measure volume of a body after every step during a milling process. For explm.
as you can see in the Image- i want to drill two holes in a solid cube one after another and in between
i have to measure how much volume i have deducted in each step.
I have tried to save as IPW part, but i cant do anything rather than visualizing.
Have anyone an Idea. thanks in advance.





RE: Volume in NX
Right click on a feature in MNT and select extract body here. Then you can calculate the volume for each step.
Regards
Didier Psaltopoulos
http://www.psi-cad.fr
RE: Volume in NX
I apologize, forget my answer. It's not a cam solution.
Regards
Didier Psaltopoulos
http://www.psi-cad.fr
RE: Volume in NX
Mark Rief
NX CAM Customer Success
Siemens PLM Software
RE: Volume in NX
Good solution, but he need NX11.0.1
Regards
Didier Psaltopoulos
http://www.psi-cad.fr
RE: Volume in NX
RE: Volume in NX
There is a nice Quick Tip on volume available
https://community.plm.automation.siemens.com/t5/NX...
John Joyce
Manufacturing Engineer
Senior Aerospace CT
NX 10 & 11.0.1 Vericut 8.0