Center portion of elliptical and torrispherical heads
Center portion of elliptical and torrispherical heads
(OP)
What is the code case that allows the center 80% of an elliptical and torrispherical head to be calculated as a hemispherical head?
API 510 allows it in para 7.4.6, ASME infers it in the nozzle calc in UG37, and API 579 has it in their head calcs in para 2C.3.5 and 2c.3.6... but I cannot find anything that allows it for NBIC... I am assuming that having an ASME Code Case would be ok.
API 510 allows it in para 7.4.6, ASME infers it in the nozzle calc in UG37, and API 579 has it in their head calcs in para 2C.3.5 and 2c.3.6... but I cannot find anything that allows it for NBIC... I am assuming that having an ASME Code Case would be ok.





RE: Center portion of elliptical and torrispherical heads
RE: Center portion of elliptical and torrispherical heads
RE: Center portion of elliptical and torrispherical heads
RE: Center portion of elliptical and torrispherical heads
Regards,
Mike
The problem with sloppy work is that the supply FAR EXCEEDS the demand
RE: Center portion of elliptical and torrispherical heads
RE: Center portion of elliptical and torrispherical heads
RE: Center portion of elliptical and torrispherical heads
RE: Center portion of elliptical and torrispherical heads