NX 11.0.0.33 - Assembly Clash Analysis[Assemblies tab?Clearance Analysis ]
NX 11.0.0.33 - Assembly Clash Analysis[Assemblies tab?Clearance Analysis ]
(OP)
Hello Engg Tips,
We are working on clash analysis for a product.But the results are not as expected.It calculates in different way based on different positions of the component.
Attached is a test case image for your reference.
Kindly clarify with your inputs.
We are working on clash analysis for a product.But the results are not as expected.It calculates in different way based on different positions of the component.
Attached is a test case image for your reference.
Kindly clarify with your inputs.
regards,
Mathi Krishnan
NX11.0.0





RE: NX 11.0.0.33 - Assembly Clash Analysis[Assemblies tab?Clearance Analysis ]
When the boundary faces are not within each other,the calculation plane is changing in different way and produces wrong dimension values.
Attached image for the reference.
regards,
Mathi Krishnan
NX11.0.0
RE: NX 11.0.0.33 - Assembly Clash Analysis[Assemblies tab?Clearance Analysis ]
I have already found this problem and I agree with you.
Regards
Didier Psaltopoulos
http://www.psi-cad.fr