How do I import a .prt file?
How do I import a .prt file?
(OP)
How do I import a .prt file?
Thank you!
Thank you!
Thank you,
Trent
NX 9.0.3.4
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
How do I import a .prt file?
|
RE: How do I import a .prt file?
www.nxjournaling.com
RE: How do I import a .prt file?
NX: See Cowskis post above.
PTC... You will need to use the special translator under File- Import - Pro/E
If you don't know the originating system, I think you can open the file ( if it is relatively small , say <2 MB) in the Notepad
somewhere in the mass of unreadable garble it will print " Parametric Technology" or "Siemens".
( I did that a few years ago.)'
Regards,
Tomas
RE: How do I import a .prt file?
Thank you,
Trent
NX 9.0.3.4