Measuring Bending stress on 3D Solid elements in abaqus
Measuring Bending stress on 3D Solid elements in abaqus
(OP)
I wanted to know, if there is a way in abaqus to obtain the bending stress only on 3D solid materials.
Regards,
Ardalan
Regards,
Ardalan





RE: Measuring Bending stress on 3D Solid elements in abaqus
http://www.digitaleng.news/de/stress-in-finite-ele...
http://www.digitaleng.news/de/stress-in-finite-ele...
http://www.digitaleng.news/de/stress-in-fea-part-3...
Materials and the kinematics accounted for in the elements (1D/2D/3D) are two different things. Bending deformation will only be captured by some 1D, 2D, and, unless I am mistaken, all 3D elements; there are trade-offs you make in choosing elements and materials.
*********************************************************
Are you new to this forum? If so, please read these FAQs:
http://www.eng-tips.com/faqs.cfm?fid=376
http://www.eng-tips.com/faqs.cfm?fid=1083
RE: Measuring Bending stress on 3D Solid elements in abaqus
Regards,
Ardalan
RE: Measuring Bending stress on 3D Solid elements in abaqus