×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Silica removal?

Silica removal?

Silica removal?

(OP)
I have to treat 1200 m³/day of raw water from a well,  with a content of about 135 ppm silicate expressed as CaCO3. I have to reduce its content to 10-15 ppm before an ultrafiltration treatment.I know that is possible with a flocculation with MgO but till now I haven't practical experience of it with this flow rate.
It must be mentioned that this raw water has a high conductivity (1500 microsiemens).  What can you suggest me to reach a good result?

RE: Silica removal?

I was working on a similar problem not too long ago (didn't really pursue the solution).  I was informed to try anion exchange beads, if the silica is dissolved.  As far as flocculation goes, I've been toying with a polyacrylamide flocculant from Tramfloc, Inc.  They do have strong cationic forms.  www.tramfloc.com  Hope it helps.

RE: Silica removal?

(OP)
Thanks aspearin1, yes I have the silica dissolved, but if I have a high contents of salts I must to back-wash the resins very often, that's right? So to obtain 1200 cubic meter/day I have to pump from the well a lot of water much. Tell me if I wrong.
You have chosen the solution with flocculant, what are settling  characteristics of the sludge you have obtained?
    

RE: Silica removal?

The settling characteristics are all dependent on the size and density of the particles you're trying to settle out.  I am actually working with very light dissolved particles, so the settling is only due to the flocculant itself falling out of solution.  How often you need to regenerate your ion exchange beads all depends on your flow and content, including other anions that will compete with silica removal.  This is why anion exchange beads was not an option for me.  I had too many anions in solution that prefered ion exchange over silica.  You really need to run some lab tests to determine if the exchange beads will work for you.

RE: Silica removal?

I suggest you post your question at the Water treatment & Distribution Forum, lots of experts there.
My experience with silica removal via IX is that it is the first anion to 'break through,' in agreement with aspearin1's comment.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources