Dear Experts, I Would like to
Dear Experts, I Would like to
(OP)
Dear Experts,
I Would like to know the detail of mass flow rate TEST. Why it is basic test in plastics? and What is the purpose of it?
I Would like to know the detail of mass flow rate TEST. Why it is basic test in plastics? and What is the purpose of it?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action





RE: Dear Experts, I Would like to
RE: Dear Experts, I Would like to
It is better to have enough ideas for some of them to be wrong, than to be always right by having no ideas at all.
RE: Dear Experts, I Would like to
Dear Mr.ornerynorsk,
Your Right am questioned about the MELT FLOW RATE TEST.
Am Here discussed about the MELT FLOW RATE test of HDPE materials(BOROUGE PE 100)with my Production manager When i asked him about the MFR test, He was answered that MFR Test is related to how much of Parameters on the Extrusion Machine to set Like Extrusion Pressure and Heat input(melting Temperature) Etc., can we have to set on the Machine. By testing the MFR for particular batch of raw materials we know the Input parameters for machines results
My Question is
What ever we getting the TEST result on MFR test.
1. But the MELTING TEMPERATURE of Borouge PE100 is constant 190 deg c. Then why we need to test the MFR?
2. The extrusion speed we input on Machine for particular pipe size. To attain the required production is our decision with quality requirements Then why we need to test the MFR?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
RE: Dear Experts, I Would like to
http://www.ptonline.com/columns/melt-flow-rate-tes...
TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! https://www.youtube.com/watch?v=BKorP55Aqvg
FAQ731-376: Eng-Tips.com Forum Policies forum1529: Translation Assistance for Engineers
RE: Dear Experts, I Would like to
Thanking You
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action