Panel Mounted Disconnect
Panel Mounted Disconnect
(OP)
I have a control system that is to be entirely be mounted to back of the faceplate and I don't want the shaft and all it's headaches. I'm looking for a disconnect I can mount to the BACK of the front panel. Has anyone got a line on these things I'm not finding any. I'm working in the 40~80A 208V region. (USA)
Keith Cress
kcress - http://www.flaminsystems.com





RE: Panel Mounted Disconnect
https://library.e.abb.com/public/ed5863ec304b2ca9c...
Hope that helps, MikeL
RE: Panel Mounted Disconnect
Thank you!
Keith Cress
kcress - http://www.flaminsystems.com
RE: Panel Mounted Disconnect
RE: Panel Mounted Disconnect
Good luck, MikeL.
RE: Panel Mounted Disconnect
Keith Cress
kcress - http://www.flaminsystems.com
RE: Panel Mounted Disconnect
MikeL
RE: Panel Mounted Disconnect
Thanks again.
Keith Cress
kcress - http://www.flaminsystems.com
RE: Panel Mounted Disconnect
Glad it worked out, I get a lot from this forum, glad to return the favor.