Dear Sir As per NACE MR 0175/ ISO 1
Dear Sir As per NACE MR 0175/ ISO 1
(OP)
Dear Sir As per NACE MR 0175/ ISO 15156-2 CLAUSE 7.4
Is it required to carry hardness test for the material if plate cut by using gas cutting machine as per NACE requirement?
Is it required to carry hardness test for the material if plate cut by using gas cutting machine as per NACE requirement?





RE: Dear Sir As per NACE MR 0175/ ISO 1
Steve Jones
Corrosion Management Consultant
http://www.linkedin.com/pub/8/83b/b04
All answers are personal opinions only and are in no way connected with any employer.