HAP report
HAP report
(OP)
What does the value for the ventilation load of the terminal units on the air system design page indicate? The ventilation load I know is indicated as the cooling coil load so how does HAP attain that value for their ventilation load?





RE: HAP report
You should alter air system type to CAV, VAV or whatever you have if you use central ventilation unit.
If those system are distinct ones, the safest way is to define your terminals as terminal units type, and use additional system as ventilation system, determined as it is in reality. Than you will have completely separated loads in the report.
RE: HAP report
RE: HAP report
Verify the heating side of the system. This may help with your questions.