Elevator with no lobby
Elevator with no lobby
(OP)
Hi,
In the case of shopping mall, if the lifts/elevators are without lobby, will there be a concern smoke might spread through the lift shafts to other floors?
Do we need then to pressurize the lift shaft?
Please advise.
Thank you.
In the case of shopping mall, if the lifts/elevators are without lobby, will there be a concern smoke might spread through the lift shafts to other floors?
Do we need then to pressurize the lift shaft?
Please advise.
Thank you.





RE: Elevator with no lobby
Chris, CSWP
SolidWorks '16
ctophers home
SolidWorks Legion