Catia termination issue
Catia termination issue
(OP)
Hi folks,
i have a new question here.i have some users complaining about the CATIA termination issue recently.there is no issue with the configuration part as the RAM is 32gb and the configuration of the machines are very good.I am attaching the abend_log file from the user's machine.Please let me know your observations.
P.S: i have replaced the CAT settings and still the issue persists.i have combined both the abend file and the error log in the same text file.
i have a new question here.i have some users complaining about the CATIA termination issue recently.there is no issue with the configuration part as the RAM is 32gb and the configuration of the machines are very good.I am attaching the abend_log file from the user's machine.Please let me know your observations.
P.S: i have replaced the CAT settings and still the issue persists.i have combined both the abend file and the error log in the same text file.





RE: Catia termination issue
Any updates on this?
RE: Catia termination issue
http://www.3ds.com/support/certified-hardware/
Drew Mumaw
www.textsketcher.com
www.drewmumaw.com
RE: Catia termination issue
I believe it is place.Any let me check it over again.Thanks a lot.
RE: Catia termination issue
indocti discant et ament meminisse periti
RE: Catia termination issue
Are you talking about CAT temp,CAT settings? BTW please find the abend trace file here.
[ERROR]
first_error
Error message = Memory access violation
Error class = CATSystemError
Message id = ERR_CATSysSIGSEGV_131075
Code = 0 (0000000000000000)
Access type = read
Faulting address = 0x0
RE: Catia termination issue
indocti discant et ament meminisse periti
RE: Catia termination issue
Thank you for your inputs.Let me check it over.