×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Roof Top Privacy Fence Wind Loads

Roof Top Privacy Fence Wind Loads

Roof Top Privacy Fence Wind Loads

(OP)
Got a client who wants a ballasted privacy fence around their patio on top of their 5th story condo. Should I treat this as a parapet or a sign or something else for wind loads?

RE: Roof Top Privacy Fence Wind Loads

Parapet sounds good to me. Especially if there's no significant avenue for wind to flow beneath the screen. Substantial loads, I'm sure.

I like to debate structural engineering theory -- a lot. If I challenge you on something, know that I'm doing so because I respect your opinion enough to either change it or adopt it.

RE: Roof Top Privacy Fence Wind Loads

(OP)
Thanks KootK. I imagine the amount of ballast I am going to need will be overload the floor system. Say I only have 2' of solid screen above a 3' open guardrail, would you still call that a parapet?

RE: Roof Top Privacy Fence Wind Loads

In that case, I'd lean towards treating it as a sign. Keep in mind, however, that I'm almost a decade removed from US practice. In the Canadian wind load provisions, the important difference between sign treatment and parapet treatment seems to be the ability for the backed up air to escape beneath the air blocking surface as well as over top of it. At least that's my interpretation. You know how it is with wind. You get to chose among several simplified options, none of which completely fit your situation. If I were back in WI around the time of Y2K, this probably would have been 30 psf and done

I like to debate structural engineering theory -- a lot. If I challenge you on something, know that I'm doing so because I respect your opinion enough to either change it or adopt it.

RE: Roof Top Privacy Fence Wind Loads

(OP)
Yea, I was thinking about using 25 psf and calling it a day. It still won't likely work due to the limited floor capacity. I hate when the scope creeps on these jobs. If they had told me up-front that they wanted to do this I would have let them hire someone smarter (or dumber) than me.

Thanks for the advice.

RE: Roof Top Privacy Fence Wind Loads

physically it resmbles a sign but in air flow conditions that a parapet typically sees...so pick your poison...from a quick look at ASCE 7-10, looks like the drag coeff could be a min of 2.5

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources