ASME QW-452
ASME QW-452
(OP)
If we qualified a welder with thickness with test coupon of 10 mm or 14mm , then is there a range of accepted thickness (max & min.) for each case with GTAW or SMAW process.
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: ASME QW-452