Venue 11 Pro 5000 Series Tablet
Venue 11 Pro 5000 Series Tablet
(OP)
Hi,
Would this device be good for using Catia?
P.S. http://www.dell.com/us/p/dell-venue-11-pro/pd#seco...
Would this device be good for using Catia?
P.S. http://www.dell.com/us/p/dell-venue-11-pro/pd#seco...
CAD 2015





RE: Venue 11 Pro 5000 Series Tablet
You can always check here
I know there are some tablets used in production to see 3dxml files with FTA annotations but not with CATIA...
Regards
Fernando
https://picasaweb.google.com/102257836106335725208 - Romania
https://picasaweb.google.com/103462806772634246699... - EU
RE: Venue 11 Pro 5000 Series Tablet
CAD 2015
RE: Venue 11 Pro 5000 Series Tablet
Compare the tablet specs:
http://www.dell.com/us/business/p/dell-venue-11-pro-7000-7140/pd?ref=PD_Family
with the supported hardware from Dassault:
http://www.3ds.com/support/certified-hardware/?xtmc=catia_hardware&xtcr=8
That Dell laptop runs Windows 10 Pro 64bit so make sure that's compatible.
Drew Mumaw
www.textsketcher.com
www.drewmumaw.com
RE: Venue 11 Pro 5000 Series Tablet
--Doug