Count and measure holes and slots
Count and measure holes and slots
(OP)
is there a journal entry that I could use to count and measure the diameter of every hole and width and length dimension of every slot in a part
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
Count and measure holes and slots
|
RE: Count and measure holes and slots
If you have a 'dumb' solid and want to count the holes and slots, that may be considerably more difficult.
www.nxjournaling.com