×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Plastic Concrete Ties?

Plastic Concrete Ties?

Plastic Concrete Ties?

(OP)
This is a picture of a concrete vault wall, 24-inches thick, 18 feet tall and below the water table. The plastic item in the middle appears to me to be plastic form tie of some sort, which I have never seen before. Some of these plastic items are hollow. Others appear to have some sort of plastic cap. As you can see there is significant water intrusion at these locations. I am curious to know if any one has seen these before. I am going to direct the contractor to drill out and epoxy inject all these holes. Thoughts.

RE: Plastic Concrete Ties?

Hard to tell from the photo, with all the leakage residue, but any chance it is an epoxy or polyurethane injection port or plug previously used to control leakage?

RE: Plastic Concrete Ties?

Ditto Ingenuity.

RE: Plastic Concrete Ties?

Probably unlikely for vault walls, but did this wall have some type of temporary soil anchors? In diaphragm wall construction, failure to seal the anchorage points adequately will cause that type leakage and staining.

RE: Plastic Concrete Ties?

In precast construction we often used plastic rebar supports but nothing like this that I've ever seen.

Professional and Structural Engineer (ME, NH)
American Concrete Industries
www.americanconcrete.com

RE: Plastic Concrete Ties?


In concrete construction there are 2 form tie applications that employ plastic:

1. PVC tie sleeves. Used with steel thru tie rods (15mm or 22 mm diameter). Often simply capped after form removal, sometimes plugged with an rubber 'stopper' inside the PVC sleeve. There are some more exotic sleeves that include an alleged waterstop plate near the middle of the wall - probably more common in Europe.

2. FRP form ties. Light duty approximately 1/4" diameter rods. Heavy duty approximately 1/2" diameter. I am unaware of any really effective waterstop that goes with this product.

Any other application involving plastic would likely be something the contractor would have dreamed up.

Ralph
Structures Consulting
Northeast USA

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources